Crown Turret Truck

Crown Narrow Aisle Turret Truck
Turret Forklift
Crown Turret Truck Forklift
Crown Turret Truck Operation Video

C TSP 6500 / 7000 Series Turret Trucks Running Clearance Fork Extend + 25 Load Length + 230. 1.1 Manufacturer Crown Equipment Corporation 1.2 Model. Crown VNA trucks will operate on existing “Defined Traffic Pattern” floors less than Fmin 50. However, in order to achieve maximum productivity and reduced operating costs, Fmin 75 and above is recommended. Operating a truck on uneven and rough floor conditions with low Fmin ratings can lead to: - Severe vehicle vibrations - Truck, rack and product.

NEW BREMEN, Ohio (February 14, 2012) — Crown Equipment Corporation, one of the world’s leading forklift manufacturers, today introduced the Crown TSP 7000 and TSP 6500 Series Turret Trucks featuring the company’s innovative MonoLift™ mast. The lift trucks establish new standards in warehouse throughput by offering faster lift speeds, more capacities, higher elevations, and greater operator control and comfort.

New Standard in Very Narrow Aisle Warehouse Throughput

One of the most direct ways to gain throughput in very narrow aisle warehouses is to increase speeds. By providing faster lift, travel, pivot and traverse speeds, the Crown TSP Series helps operators complete more cycles within a defined time period.

Users of the Crown TSP Series also will benefit from greater flexibility throughout their warehouse by being able to place most loads at any height and/or at any open slot, all while traveling in a tight aisle with less than six inches of clearance. Industry research has shown that it is less expensive to gain pallet positions by going up rather than expanding the warehouse footprint.

The rigid design of the MonoLift mast is rooted in a boxed-in cross section construction that significantly minimizes twisting and swaying, providing greater stability and higher heights.

Crown TSP 6500/7000 by the Numbers

These turret trucks feature a main lift speed of 120 feet per minute, which is a 41 percent gain compared to conventional trucks.

They also deliver a 25 percent advantage in travel speed, and can complete a full traverse in only five seconds and pivot a full 180 degrees in six seconds.

In many applications, going from eight levels to 11 levels with the Crown TSP Series equals nearly 31 percent additional storage capacity. This translates to one-third more usable warehouse space.

The Crown TSP 7000 turret truck can reach a total of 675 inches, or six stories, and deliver most loads to full height. The Crown TSP 6500 can reach a total of 531 inches.

The Crown TSP Series utilizes some of the largest batteries available to provide up to 50 percent more power for truck performance and battery life. The Crown TSP 6500 utilizes 48V batteries, while the Crown TSP 7000 utilizes 80V and 72V batteries.

The Crown TSP Series features regenerative braking and lowering systems that capture lost energy and return it to the battery. This regenerative technology, combined with the option to use a larger battery, position the turret truck for energy savings and run time improvements of 25 percent or more depending on the application.

Operator-Centric Design

The Crown turret truck exhibits an operator-centric design that has resulted in one of the industry’s most accommodating operator compartments. Operators benefit from a higher level of flexibility, comfort and control.

The truck’s fully adjustable MoveControl^™ Seat orients the operator to efficiently handle the load at hand. Integrated, intuitive controls built into the armrests allow pinpoint control and the ability to blend multiple functions simultaneously.

The operator compartment can be affixed with a cold storage cabin that allows operators to remain productive in environments where temperatures can reach as low as minus 40F.

Quotes Attributable to Matt Ranly, senior marketing product manager, Crown Equipment

“In today’s ultra-competitive environment, our customers are seeking new solutions to improving productivity and maximizing their cube. The Crown TSP Series raises and travels faster, and lifts more weight at higher heights than other turret trucks currently on the market.”

“The Crown TSP Series, like the Crown RM Series narrow aisle reach truck, is changing the way managers think about the design and operation of their high-density warehouses and distribution centers.”

Video

[youtube]http://www.youtube.com/watch?v=_pAZUkIawWY&list=UUX3vQqHCpe6qf8OnwgLeIwg[/youtube]

Images

About Crown Equipment Corporation

Crown is one of the world’s largest lift truck manufacturers. Crown’s award-winning line of lift trucks maintains a reputation for exceptional product design, engineering and manufacturing. From the smallest hand pallet truck to the highest lifting turret truck, Crown seeks to provide users with safe, efficient and ergonomic lift trucks that lower total cost of ownership and maximize uptime. Headquartered in New Bremen, Ohio, Crown manufactures lift trucks that are sold throughout the world. For more information, visit www.crown.com.

Engineered to a higher standard and proven to thrive in harsh environments, the PE Series excels at dock work, transporting, order picking and more. 0003

The powerful Crown-built AC Drive Motor is specifically engineered for lift truck applications. It delivers greater torque for improved acceleration and smoother plug reversals.

The PE Series end control pallet truck is a heavy-duty, electric power lift truck that can be used as a walkie or rider truck for low-level order picking, loading, unloading and transporting.

Load Capacity
6000 – 8000 lb
Power (Electric)
24 V / 330 – 930 Ah
Head Length
36.7 – 43.2 in
Width Overall
36 in
Nominal Fork Length
36 – 144 in

For operators working in confined spaces, visibility is essential. To this end, the unique design geometry of the RC Series outpaces all others where it counts the most: in trailers, narrow aisles, and areas congested with pedestrians, equipment and products. 0003

The power unit curves in on the right side (where operators look most often). This contour, along with the low profile power unit translates into industry-leading visibility.0003

The mast and pillar design also enhances forward visibility. This has been achieved through the clean routing of hydraulics and chains as well as the orientation of the pillar itself.

The RC Series stand-up counterbalance forklift features a side-stance operator compartment that maximizes visibility and allows for easy entry/exit in applications where the operator is frequently on and off the truck.

Load Capacity
3000 – 4000 lb
Max. Lift Height
276 in
Power (Electric)
36 V / 775 – 1240 Ah
Width Overall
42 in

The Crown RM/RMD Series offers unmatched, all-around visibility – at ground level, eye level, height and in all directions around the operator.

The RMD Series is the only narrow-aisle rider reach truck with a MonoLift mast. The forks extend to allow the truck to deposit or retrieve pallets that are positioned in the rack two deep.

Crown Narrow Aisle Turret Truck

Load Capacity
3200 lb
Power (Electric)
36 volt / 930 – 1240 Ah
Head Length
60.9 – 65.3 in
Max Lift Height
400 in

The TSP Series features a stronger mast, higher reach, and narrow footprint, allowing you make the most of your storage space.0003

Crown’s MonoLift Mast provides the stability needed for operators and loads up to six stories in the air.0003

Crown’s exclusive MonoLift mast includes strengthened boxed-in sections and heavy gauge steel. As a result, there’s less twisting and swaying than with traditional, dual upright masts.

Turret Forklift

The TSP 6000 Series is a man-up turret stockpicker with a max lift height of 495 inches. This series can handle full pallet loads on either side of the aisle due to the pivoting design of the auxiliary mast and fork carriage.

Load Capacity
3000 lb
Power (Electric)
48 V
Max. Lift Height
495 in
Max. Platform Lift Height
442 in

The PTH Series features solid construction and generous use of steel – especially at critical stress points – to deliver long-lasting performance. 00030003

The durability of the PTH Series is enhanced by a reinforced lower handle, strong C-channel forks made of thick steel, cross braces and steel forgings on lift link arms and box-style push rods.

00030003In addition, the PTH Series uses yellow chromate pins and shafts for corrosion protection and hard chrome pistons to minimize rust.